Fujitsu Tablet Accessory FMWSP11 User Manual

58-0578-01.fm Page 1 Tuesday, August 21, 2001 2:52 PM

F u j i t s u P C C o r p o r a t i o n

Screen Protector

Installation Guide

FMWSP11 / FPCSP01

I N S T R U C T I O N S

This screen protector is designed for use on the Stylistic LT

C-500 and Stylistic LT P-600 pen tablet display screens.

Notes

•

Before installing a new screen protector, remove any

screen protector that is already installed. Check to see

which corner of the screen protector is not glued to the

surface of the display; ordinarily, it will be the bottom

left corner. A notch in the corner allows you to slide a

firm, pliable implement (such as a credit card) under

the screen protector for removal. Do not use a metal

implement; it could scratch the screen.

•

To ensure good adhesion, clean the screen with a soft

cotton cloth dampened with isopropyl alcohol before

installing the screen protector. When the alcohol dries,

it may leave streaks on the screen. If streaking occurs,

buff the screen gently with a clean, dry cloth.

58-0578-01.fm Page 3 Tuesday, August 21, 2001 2:52 PM

4. Remove the protective film from the top of the screen

protector, as shown in Figure 3.

5. Wipe the exposed surface of the screen protector with a

clean dry cloth to remove any adhesive left behind by the

protective film.

Figure 2. Installing the Screen Protector

Figure 3. Removing the Protective Film

58-0578-01.fm Page 4 Tuesday, August 21, 2001 2:52 PM

5200 Patrick Henry Drive

Santa Clara, CA 95054

For more information, visit our Web site

For technical support call:

1-800-8Fujitsu (1-800-838-5487)

Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu, Ltd. Stylistic is a

trademark of Fujitsu PC Corporation. All other trademarks mentioned herein are the

property of their respective owners. We cannot guarantee the accuracy of the contents of

this document. We disclaim liability for errors, omissions or future changes.

FPC58-0578-01

B5FY-1621-01EN-00